The function of this attribute is not specified. This value is primarily used as a metric of the life expectancy of the drive a drive which has had any reallocations at all is significantly more likely to fail in the immediate months. The raw value represents a count of the bad sectors that have been found and remapped. Thus, the higher the attribute value, the more sectors the drive has had to reallocate. The spindle turns on, and hence the count is increased, both when the hard disk is turned on after having before been turned entirely off (disconnected from power source) and when the hard disk returns from having previously been put to sleep mode.Ĭount of reallocated sectors. If the value of this attribute is decreasing there is a high probability that there is a problem with the disk.Īverage time of spindle spin up (from zero RPM to fully operational ).Ī tally of spindle start/stop cycles. Overall (general) throughput performance of a hard disk drive. The raw value has different structure for different vendors and is often not meaningful as a decimal number. (Vendor specific raw value.) Stores data related to the rate of hardware read errors that occurred when reading data from a disk surface. Known SMART attributes and status codes ID See the reference table below for the error codes. The next column, Reason, contains the status code that describes the exact reason of the issue. If the above value is True, then the drive is in the faulty state. For a healthy drive, it should say False. Type or copy-paste the following command: wmic /namespace:\\root\wmi path MSStorageDriver_FailurePredictStatus.See the reference table below for the error codes.Ĭheck Drive Health and SMART Status in Command Prompt The next line, Reason, contains the status code that describes the exact reason of the issue. Type or copy-paste the following command: Get-WmiObject -namespace root\wmi -class MSStorageDriver_FailurePredictStatus.Check Drive Health and SMART Status in PowerShell If you are running a Windows 10 version without the above feature, you can do the following. In this case, you can use a few other built-in Windows tools to retrieve the drive status indicator values. As of the time of this writing, it only supports NVMe SSD drives. Also, this may mean that your drive is not recognized properly by Windows 10, so the OS can't retrieve its temperature. If you don’t see the temperature details, ensure that you have the proper Windows 10 build installed. On the next page, you'll find the drive health report value under the Drive health section.Click on the Properties button below the drive's name line.On the next page, click the on the drive you want to check the SMART status for.On the right, click on the Manage Disks and Volumes link.Known SMART attributes and status codes To Check Drive Health and SMART Status in Windows 10,
0 Comments
Leave a Reply. |